ADC Integra ST XLM II cartridge mounted on headshell (out of stock)

ADC Integra ST XLM II cartridge mounted on headshell (out of stock)


  • $74.95 USD

ADC Integra ST XLM II phono cartridge. Available while supplies last!

The ADC Integra ST XLM II phono cartridge is an integrated unit composed of a straight headshell and the ADC XLM II phono cartridge. It is designed to plug into most straight tonearms.

Unlike any cartridge before it the ADC Integra ST XLM II eliminates audible tracking angle distortion...not just on one point but throughout the record's play. This is an amazing achievement for your straight arm turntable. Thanks to the Integra ST's unique tracking angle and adjustments, you get unheard of accuracy. Every nuance, every detail will be faithful to the original.

Vertical Tracking Angle. Nearly all records are cut with a tracking angle of 20° (20 degrees). That is the way they were made. That's the way they are meant to be played. But with varying tonearm heights getting the exact vertical tracking angle isn't easy. Except with the ADC Integra ST XLM II. It's tracking angle is adjustable enough to compensate for any straight tonearm height.

Offset Angle. As the tonearm sweeps across the record, the angle that it makes to the groove constantly changes. An error as little as 2° (2 degrees) can more than double cartridge distortion! With the ADC Integra ST XLM II adjusted exactly right at 2 groove radii on the music area of your record, the error can be less that 1° (1 degree) at any point.

Overhang Dimension. In combination with the Offset Angle adjustment, the ADC Integra ST XLM II offers this second refinement to minimize offset angle error.

Carbon Fibre Construction. Thanks to carbon fibre, the ADC Integra ST XLM II offers up to 50% less mass than conventional headshell/cartridge combinations so that it tracks the grooves better and preserves your record collection longer. Also due to its rigidity, it virtually eliminates low frequency signal loss, resonance and flexing. Carbon fibre also provides an increase of shielding from external electrical fields of all kinds thereby reducing extraneous noises you may hear.

Patented Induced Magnet Design. Unlike most moving magnet and moving coil designs found in other cartridges, ADC's Induced Magnet design has only one moving element that instantaneously reacts to the most complicated record passages without restriction.

Omni-Pivot System. It's a major advance. There are no restrictive armature governors, wires or adhesives. Instead each armature is micro-machined to within 1/4 the thickness of human hair to perfectly lock into ADC's high definition suspension block. The Omni-Pivot System provides optimum location of the armature at all times under all playing conditions. The result is greater musical definition and stereo separation.

The ADC Integra ST XLM II offers the listener uncompromised quality and performance even under the most demanding requirements.

ADC Integra ST XLM II Specifications

Output voltage at 1000 Hz,

5.6 mV

Output balance

1.5 dB

Channel separation at 1 kHz

26 dB

Frequency response

15-24.000 Hz +/- 2dB

Stylus type

0.03 x 0.07 mil Nude Elliptical stylus

Tracking force, recommended

1.2 g +/- 0.3 g (12 mN)

Recommended load resistance

47 kOhm

Cartridge colour, body/stylus


Integra ST XLM II weight

9 g

Replacement stylus unit



Stay in the loop with JICO Canada sales, promotions & deals!